2004 Civic Si
Ground Control Installation
Page 1 of 2. |
 |
| Pictured here is our donor car a 2004 Honda Civic Si owned by Gio Macedo. Installation is done by Andrie Hartanto of Prima-Racing.com |
 |
| Here are the Ground Control sleeve type coilovers. There are many cheap brands of sleeve type coilovers, but that`s all they are, are just cheap Chinese made brands. The cheap ones have no R&D and many people complain that the ride quality is so poor.
Ground Control Coilovers are 100% made in the USA using Eibach Springs. The Springs can actually be custom ordered to your weight specifications. |
 |
|
The Ground Control Coilovers can be used with many different types of shocks. You can use stock which is really recommended, or you can use a superior brand such as Koni. Koni shocks come with a lifetime warranty and give a great ride for the money. |
 |
|
This is the for the Rear Installation. We will have to remove the shock and spring housing. |
 |
|
Remove the bottom bolt that holds the perch in place. |
 |
|
Remove the Top 3 bolts and then pull out the assembly in one piece. |
 |
|
Picture Stock Assembly (shocks and springs) |
 |
|
Picture of the car without the shock and spring assembly. |
 |
|
With Ground Controls you have to use the stock perch. This has to be cut so we used some tape as a guide as to where the item will be cut. |
 |
|
Since we didn't have a full blow shop we had to do cut it outside. Not the easiest thing to do. |
|
Continued On the Next Page |
Printable Version
